Strengthen the signal reception Allowaarls

Strengthen the signal reception Allowaarls


  • 1 Allowaarls
  • 2 strengthen the signal reception Allowaarls 2.1 Centering Distance 2.2 Removal of physical barriers 2.3 add back device Allowaarls Wireless repeater 2.4 change the signal to your wireless router channels 2.5 change Alontn
  • 2.1 Centering Distance
  • 2.2 Removal of physical barriers
  • 2.3 add back device Allowaarls Wireless repeater
  • 2.4 change the signal to your wireless router channels
  • 2.5 change Alontn
  • 3 Phone settings


Is Allowaarls any type of computer networks that operate on the transfer of information between nodes without the use of wires, which each device Internet wirelessly sends both wireless router, or access point Access point.

Strengthen the signal reception Allowaarls

Centering Distance

Put the wireless router or access point in the middle of your home place or your organization, because the router sends the signal to the spherical shape of equal power between all sides, if placed router at the tip of your home or in the room that you are inhabited, the signal will be strong in your room yes, but if went to the other room at the end of the house, you will find a very weak signal, this is half of energy Allowaarls will go down the drain to the outside of your home, so if you put the device in the middle of the house, the Internet will be distributed equally among all parties to the home and will enjoy freedom of movement.

Removal of physical barriers

Lift the router from the ground, and away from physical barriers both walls, offices, cabinets, metal barriers, or wood. Because this would negatively affect the signal Allowaarls you have, the more obstacles in the way of increased signal Allowaarls, the more weakened signal, and said access to the greatest possible benefit from the signal.

Add back device Allowaarls Wireless repeater

Allowaarls needs to re-strengthen the device, and only if the very far distance between you and the wireless router. This device will work on receiving the signal from Allowaarls original and then resend the signal and strengthened again to receive the greatest possible speed.

Signal to your wireless router channels change

Be in the field of radio signals or microwave or any other signals, so Allowaarls waves can interfere with it, so try the wireless channel that Tschdamha through the "configuration" page of Balroter have changed, so choose the purest among them.

Alontn change

Allowaarls sends the signal in half a specified diameter and towards the sphere of equal parties in terms of power, but can use stank special enough to allow you to direct all the power and energy signal for Ballowaarls specific direction depending on your selection you for this trend, so that the signal will not go energy wasted in unnecessary areas of your home. For example, there you Yagi or hi-gain you can use.

Phone settings

There are some existing roads in the mobile device settings can its user optimization of its ability to receiving the Internet in general and Allowaarls, remind you the following:

The first way:

  • We go to the control panel control panel.
  • Choose System and Security or System and Security.
  • Press on the power options or Power Options.
  • Press to change the settings schema or change plan settings.
  • Press the Change advanced power settings or change advanced power settings.
  • Choose wireless or Wireless Adapter Settings Adapter Settings.
  • Press the power saving mode or Power Saving Mode.
  • Change all the settings to the maximum performance or Maximum Performance.
  • Press OK and re-steps for a balanced and energy-saving and high-performance.

The second method:

  • We go to the menu in English Start Start.
  • Choose Run or Run English.
  • We are writing literally inside the following gpedit.msc command.
  • From the Computer Configuration tab, choose Administrative Templates.
  • We choose Networks.
  • نختار Qos Packet Scheduler .
  • We choose Limit reservable bandwidth.
  • Show us a new window and there is a selection on option is not configured, you simply click on possible option.
  • Option Bandwidth limit 100% Make it.
  • Select apply and then OK.


We regret it!

Successfully sent, thank you!

Related Posts
• Signal booster Allowaarls
• Strengthening Allowaarls
• Wi-Fi signal booster
• How powerful Allowaarls